$ 86
Conform to IEEE802.3af/at PoE standards, the 4-port gigabit PoE switch transmits data and DC power on a single LAN cable. Quickly expand your 4G router network.
▫ 5x 1000Mbps Gigabit RJ45 ports
▫ With 4x PoE(+) ports and 1x uplink port
▫ 65watt total power budget, each port max 30watt
▫ IEEE802.3af/at PoE standards, output 48/52Volt
▫ Unmanaged PoE switch, plug-and-play
POWER UP OUTDOOR ROUTER & LINK PoE AP, CAMERA, COMPUTER
IEEE802.3af/at Standard PoE+ Switch
Support both 48V & 52Volt PoE Devices
65Watt power budget. Max 30W Each.
5x 1000Mbps Gigabit RJ45 Ports
With 4xPoE and 1xUplink Ports
Speed up speed & reduce latency
Unmanaged Switch Simple Set Up
No Software or Configuration Required
PD Detection & Overload Arrangement
Powered by high-performance QCA8337, the gigabit PoE switch could lookup with 2048 MAC addresses and a four-traffic class QoS flow control.
Comes with palm size and fanless design, the PoE switch is completely noise-free when mounting on a wall or use on a desktop.
Comply with IEEE802.3az energy-efficient Ethernet mode. It is designed to optimize power usage and lower down the operating cost.
PoE Port | No. 1~4 Ports |
Uplink Port | No. 5 Port |
PoE Port Priority | Port 1 > 2 > 3 > 4 |
Transmission Rate | 10/100/1000Mbps |
Transmission Mode | Adaptive full/half-duplex |
MAC Table | 2048 |
Packet Forwarding | Rate 890kbps |
Packet Buffer | Memory 768Kb |
Indicator | Orange: PoE Power Green: Link / Act |
Lightning Protection | Common Mode 2KV Differential Mode 0.5KV |
Measurement | Switch: 110x75x23mm / 173gram Full-set: 193x132x80mm / 652gram |
Working Environment | Temperature: -10 ~ 45°C Celsius Humidity: 10% ~ 90% RH |
Storage Environment | Temperature: -20 ~ 70°C Celsius Humidity: 5% ~ 95% RH |
Power Supply | Input: 110-240V 50Hz Output: DC 52V 1.25A CE and UL approved |
Networking Protocol | IEEE802.3i 10 BASE-T IEEE802.3u 100 BASE-TX IEEE802.3ab 1000 BASE-T IEEE802.3x Flow Control IEEE802.3af/at Power over Ethernet IEEE802.3az EEE |
Reviews
There are no reviews yet.