$ 337
The Australian 4G modem has a dedicated mobile modem inside. It connects to Optus Telstra and Vodafone mobile networks. The Cat.4 LTE modem provides max 150Mbs download speed and connects to up to 57 devices with LAN Ethernet & powerful Wi-Fi in 100~200 yards.
Innovative high-gain paddle 4G antennas included and supported multiple mobile protocols, OpenVPN, SSH, and remote access.
The ideal 4G modem for providing internet in home, office, shop, restaurant, caravan, and industrial applications.
FAST & FREE SHIPPING FROM SYDNEY AUSTRALIA
Australian LTE modem inside with long-range Wi-Fi
Cat.4 modem for Australia networks
Dual SIM slots for Nano SIM cards
Twistable high-gain 4G LTE Antenna
100~200 yards long-distance Wi-Fi coverage
Up to 27dBm (1-Watt) 2.4GHz Wi-Fi boosters
Replaceable SMA standard Wi-Fi antennas
Control priority of multiple Internet connections
Accepts input WAN & output LAN Ethernet
Access router remotely from Traversal Cloud
Built-in 6KV 1.5KV lighting protection module
Against extreme weather -40°C ~ +80°C
Wide-range power source 48V PoE & 9~48V DC
4G LTE modem supports all of the Australia mobile operators.
Cat.4 mobile modem provides max 150Mbps download speed.
High sensitivity modem supports 4G signals > -105dBm.
Dual Nano SIM card slot. One of the SIM cards is for backup.
Integrated with GobiNet, QMI, and PPP mobile protocols.
Support custom APN parameters.
Wide-range LTE antennas – support all of the 4G frequencies.
Twist the paddle antenna direction and receive a better signal.
SMA standard sockets – support external antennas.
Powerful firmware for 4G router, with QoS & OpenVPN.
Rooted with full authority, SSH, FTP, and software center.
Pre-built the bootloader. Contact us for online demo test.
4G backup & WAN Internet
Supports up to 57 concurrent users
Provides LAN Ethernet and Wi-Fi
for IoT, CCTV, Vending machine, etc
Flexible installation & power sources
Enhanced 4G signal reception
Wi-Fi network for guests
Enabled smart traffic control
Call Us +91 9876 543 210
or Send an Email
Support Australia mobile carriers:
Telstra, Vodafone, and broadband plan of Optus
1 x Australia 4G LTE Modem
Cat.4 Australia mobile modem
2 x 4G paddle antenna
2 x Wi-Fi whip antenna
1 x 1-meter LAN cable
1 x Power adapter – Australian plug
6/8dBi directional panel antenna
Dual-polarized MIMO antenna
4-Port Gigabit PoE Switch
Transmits data and DC power on LAN cable
LTE Category: | CAT.4 (3GPP E-UTRA Release 10) |
4G FDD Bands: | B1/B2/B3/B4/B5/B7/B8/B28 Download max 150Mbps / Upload max 50Mbps |
4G TDD Bands: | B40 | Download max 130Mbps / Upload max 30Mbps |
3G Bands: | B1/B2/B5/B8 DC-HSDPA: DL Max 42Mbps HSUPA: UL Max 5.76Mbps WCDMA: DL 384Kbps / UL 384Kbps |
2G Bands: | GSM/EDGE: B2/B3/B5/B8 EDGE: DL 296Kbps / UL 236.8Kbps GPRS: DL 107Kbps / UL 85.6Kbps |
Bandwidth: | 1.4/3/5/10/15/20MHz |
Support Antenna: | DL MIMO, supports Rx-diversity (Except LTE B2) |
Temperature: | Working: -40°C ~ +80°C |
Working Area: | Australia, New Zealand, Brazil, Asia, Latin America |
Certification: | RCM / FCC / Anatel |
CPU: | Qualcomm Atheros QCA9531 |
Frequency: | 650MHz |
Memory: | DDR2 RAM 128MB |
Flash: | SPI FLASH 16MB |
SIM card slot: | Double Nano-SIM Cards (12.3×8.8mm) |
WAN/LAN port: | 10/100Mbps on PoE adapter |
Indicator: | System / Wi-Fi / SIM1 / SIM2 |
Temperature: | Working: -40 to +80°C Storage: -50 to +90°C |
Humidity: | 10%~90% RH |
Measurement: | Router 230x175x70mm / 980g |
Wi-Fi standards: | IEEE 802.11 a/b/g/n IEEE 802.3 and IEEE 802.3u |
MIMO Wi-Fi: | 2T2R MIMO (multiple-input multiple-output) |
Transmission rate: | 300Mbps |
Frequency: | 2.4GHz – 2412~2484 MHz |
Channel: | 1~13 |
Bandwidth: | 20/40 MHz or Auto |
Output power: | 802.11b: 27±2dBm 802.11g: 25±2dBm 802.11n: 23±2dBm |
Wi-Fi mode: | 11b / 11g / 11n only 11b/g mixed or 11b/g/n mixed |
Concurrent user: | 57 users |
2 x 4G LTE antenna: | Frequency: 700~960 / 1710~2170 / 2300~2700MHz Peak Gain: 3~5dBi / V.S.W.R.: ≤ 3.0 Size: 209 x 42 mm / Material: ABS |
2 x Wi-Fi antenna: | Frequency: 2400~2500MHz Gain: 4~5dBi / V.S.W.R.: ≤ 1.92 Size: Ø13 x 201 mm / Material: TPEE |
Connector: | SMA Male (Not RP) |
Polarization: | Vertical |
Impedance: | 50 Ω |
Max Input power: | 10 Watt |
Temperature: | Working: -0° to 50° Celsius |
DC Adapter: |
Input: 110~240V / Output 12V 2A (Include) |
PoE Adapter: |
Input: 110~240V / Output: 48V 0.5A (Exclude) |
LAN Cable: | 3⅓ feet LAN cable included |
Router Firmware: | OpenEzen System |
Log in: | IP address: 192.168.30.1 Password: root |
Computer: | Windows / Mac / Linux / etc |
Bootloader: | EzBoot (192.168.1.1) |
Jack (store manager) –
Assembly is very easy to do.