$ 544 $ 368
2023 newly upgraded outdoor Australia 4G router uses dual Nano-SIM cards and provides internet on Wi-Fi and LAN. Cat4 modem inside supports all of the Australian mobile networks.
• Cat 4 mobile modem provides max 150Mbps download speed.
• MIMO Wi-Fi speed is 300Mbps and supports 57 concurrent users.
• Router powered by single LAN cable from 48Volt PoE adapter.
• IP67 rated waterproof case and built-in lighting protection.
FAST & FREE SHIPPING FROM SYDNEY AUSTRALIA
Insert a SIM card and get the Internet
Supports Australian Mobile Carriers
IP67 rated case withstand extreme weather and rugged deployments.
Receive stronger mobile signals than the indoor
Reduce signal loss on the antenna cable
Get powerful Wi-Fi hotspot in the outside yard
2023 newly upgraded outdoor 4G cellular router! Support double Nano-SIM cards. Connect to the SIM1 by default. Include a precise SIM cardholder.
Cat 4 mobile modem inside. Provide max 150Mbps download speed, and 50Mbps upload speed. The sensitive 4G mobile modem supports -101dBm 4G signal.
Support all of the Australian mobile carriers, such as Optus, Telstra, etc. Connects 4G LTE, 3G WCDMA, and 2G internets. 4G router supports both phone SIM card and data SIM card (The SIM card is excluded.).
Powered by 640MHz CPU, the UK 4G router provides 300Mbps Wi-Fi and 100Mbps LAN Ethernet. You can connect various devices to the 4G router.
Built-in 27dBm Wi-Fi booster, the 4G router creates a powerful wireless hotspot and covers up to 150~300 yards radius in open area. It can support up to 57 concurrent Wi-Fi users. You can adjust the Wi-Fi power or turn it off.
Connect switch, router, or computer to the LAN port on PoE adapter, and extend the 4G internet to an indoor area.
Comply with 802.3af/at PoE standard. The outdoor 4G router uses one single LAN cable for transmitting both power and data.The PoE adapter and 30-feet LAN cable are included in the box.
PoE 4G router supports max 328-feet LAN cable and also supports the 48Volt standard PoE switch.
Need to use on 12Volt or 24Volt DC power?
Install a PoE splitter in the router, and divide electric power to the DC socket.
Integrated MIMO technology, the mobile 4G router, uses 2T2R MIMO antennas to improve speed and reduce latency.
The mobile 4G router provides 4x type-N waterproof connectors to join the external WiFI & 4G antennas.
The N-female connectors offer low-loss connections. If have a weak 4G signal reception or require to improve the WiFi signal coverage, you can easily upgrade the higher-gain antennas.
Open Sources
Driver Installed
Plug-and-Play
Encryption
Remote Access
SSH Terminal
1 x Outdoor Australia 4G Router
4 x Omni Antenna
1 x 30-feet LAN Cable
1 x 48V PoE Adapter
1 x Mounting Set & Tool
Call Us +91 9876 543 210
or Send an Email
Support Australia mobile carriers:
Telstra, Vodafone, and broadband plan of Optus
LTE Category: | CAT.4 (3GPP E-UTRA Release 10) |
4G FDD Bands: | B1/B2/B3/B4/B5/B7/B8/B28 Download max 150Mbps / Upload max 50Mbps |
4G TDD Bands: | B40 | Download max 130Mbps / Upload max 30Mbps |
3G Bands: | B1/B2/B5/B8 DC-HSDPA: DL Max 42Mbps HSUPA: UL Max 5.76Mbps WCDMA: DL 384Kbps / UL 384Kbps |
2G Bands: | GSM/EDGE: B2/B3/B5/B8 EDGE: DL 296Kbps / UL 236.8Kbps GPRS: DL 107Kbps / UL 85.6Kbps |
Bandwidth: | 1.4/3/5/10/15/20MHz |
Support Antenna: | DL MIMO, supports Rx-diversity (Except LTE B2) |
Temperature: | Working: -40°C ~ +80°C |
Working Area: | Australia, New Zealand, Brazil, Asia, Latin America |
Certification: | RCM / FCC / Anatel |
CPU: | Qualcomm Atheros QCA9531 |
Frequency: | 650MHz |
Memory: | DDR2 RAM 128MB |
Flash: | SPI FLASH 16MB |
SIM card slot: | Double Nano-SIM Cards (12.3×8.8mm) |
WAN/LAN port: | 10/100Mbps on PoE adapter |
Indicator: | System / Wi-Fi / SIM1 / SIM2 |
Temperature: | Working: -40 to +80°C Storage: -50 to +90°C |
Humidity: | 10%~90% RH |
Measurement: | Router 230x175x70mm / 980g |
<h3″>Wi-Fi Network
Wi-Fi standards: | IEEE 802.11 a/b/g/n IEEE 802.3 and IEEE 802.3u |
MIMO Wi-Fi: | 2T2R MIMO (multiple-input multiple-output) |
Transmission rate: | 300Mbps |
Frequency: | 2.4GHz – 2412~2484 MHz |
Channel: | 1~13 |
Bandwidth: | 20/40 MHz or Auto |
Output power: | 802.11b: 27±2dBm 802.11g: 25±2dBm 802.11n: 23±2dBm |
Wi-Fi mode: | 11b / 11g / 11n only 11b/g mixed or 11b/g/n mixed |
Concurrent user: | 57 users |
2 x 4G LTE antenna: | Frequency: 698~960 / 1710~2700MHz Gain: 3~4dBi / V.S.W.R.: ≤ 2.0 |
2 x Wi-Fi antenna: | Frequency: 2400~2500MHz Gain: 5dBi / V.S.W.R.: ≤ 2.0 |
Measurement: | Φ22×180mm |
Connector: | N Male |
Polarization: | Vertical |
Impedance: | 50 Ω |
Max Input power: | 10 Watt |
PoE Adapter: | Input: 110~24oVAC 50/60Hz Output: 48Volt 0.5Amps |
LAN Cable: | 30-feet LAN cable included. Max 320-feet. |
PoE Wiring: | Ethernet 1, 2, 3, 6 DC+ 4, 5 | DC- 7, 8 |
DC Socket: | 9~48Volt 1.5Amps |
Router Firmware: | OpenEzen System |
Log in: | IP address: 192.168.30.1 Password: root |
Computer: | Windows / Mac / Linux / etc |
Bootloader: | EzBoot (192.168.1.1) |
Emily –
I mounted this outdoor router in an area where the signal was very weak, after mounting I had a very good wifi internet. Assembly is very easy to do.
Emily (store manager) –
I mounted this outdoor router in an area where the signal was very weak, after mounting I had a very good wifi internet. Assembly is very easy to do.